黃朋科，博士，副研究員，碩士生導師

Tel.:0574-86693021  

E-mail:huangpengke@nimte.ac.cn

 

教育與工作經曆：

2022-至今，副研究員，中國科學院甯波材料技術與工程研究所

2020-2022，博士後，中國科學院甯波材料技術與工程研究所

2017-2020，博士，中國科學院甯波材料技術與工程研究所

2014-2017，碩士，中國科學院甯波材料技術與工程研究所-中北大學 聯合培養

2010-2014，本科，安徽理工大學

 

個人簡介：

        黃朋科，博士，副研究員，碩士生導師。2020年在中科院甯波材料所所獲得高分子化學與物理專業的博士學位，2020年至今在中科院甯波材料所先後任優秀博士後、副研究員崗位。主要從事聚合物發泡材料及其結構-性能關系研究，以一作/通訊作者在Chem. Eng. J., Compos. Sci. Technol., Compos. Part A/Part B等期刊發表論文20餘篇，申請專利17項（已授權9項），主持國家自然科學青年基金、中科院福建STS項目、中科院莆田STS項目等基金項目。相關工作收到科技日報、新華社、科學畫報等權威媒體/出版社的受邀撰稿，榮獲中石化聯合外資委舉辦的化工創意設計挑戰賽第二名和江蘇省優秀科普作品二等獎等，擔任中國創新創業大賽、浙江舟山群島全球海洋經濟創業大賽等賽事評委，擔任廣東盛達穗南環保科技有限公司技術顧問，擔任Ind. Eng. Chem. Res.，J. Cell. Plast.等國際期刊的審稿人。

 

代表性論文：

[1] Y.Z. Su, P.K. Huang*, Y.K. Chong, et al. Mechanically robust foamed polypropylene/bamboo powder composite basketworks by CO₂ extrusion foaming, ACS Applied Polymer Materials 5 (2023) 3604.

[2] H. Zheng, P.K. Huang*, P.C. Lee, et al, Lightweight olefin block copolymers foams with shrinkable and recoverable performance via supercritical CO₂ foaming, The Journal of Supercritical Fluids 200 (2023) 105981.

[3] P.K. Huang, Y.Z. Su, F. Wu, et al, Extruded polypropylene foams with radially gradient porous structures and selective filtration property via supercritical CO2 foaming, Journal of CO2 Utilization 60 (2022) 101995.

[4] P.K. Huang, F. Wu, B. Shen*, et al, Biomimetic porous polypropylene foams with special wettability properties, Composites Part B: Engineering 190 (2020) 107927.

[5] P.K. Huang, M.H. Wu, Y.Y. Pang*, et al, Ultrastrong, flexible and lightweight anisotropic polypropylene foams with superior flame retardancy, Composites Part A: Applied Science and Manufacturing 116 (2019) 180.

[6] P.K. Huang, F. Wu, B. Shen*, et al, Bio-inspired lightweight polypropylene foams with tunable hierarchical tubular porous structure and its application for oil-water separation, Chemical Engineering Journal 370 (2019) 1322.

[7] P.K. Huang, F. Wu, Y. Pang*, et al. Enhanced dispersion, flame retardancy and mechanical properties of polypropylene/intumescent flame retardant composites via supercritical CO2 foaming followed by defoaming, Composites Science and Technology 171 (2019) 282.

[8] P.K. Huang, Y.Z. Su, H.B. Luo, et al, Facile one-step method to manufacture polypropylene bead foams with outstanding thermal insulation and mechanical properties via supercritical CO2 extrusion foaming, Journal of CO2 Utilization 64 (2022) 102167.

[9] Y.Z. Su, P.K. Huang*, H.B. Luo, et al, Supercritical CO2 extrusion foaming and steam-chest molding of polypropylene/thermoplastic polyurethane bead foams, ACS Applied Polymer Materials 4 (2022) 9441.

[10] C.X. Gong, H. Zheng, P.K. Huang*, et al, Supercritical CO2 foaming of lightweight polyolefin elastomer/trans-polyoctylene rubber composite foams with extra-soft and anti-Shrinkage performance, Industrial & Engineering Chemistry Research 62 (2023) 6214.